You will not be allowed to compare more than 4 products at a time
View compareInstallation Guide
How to Install a Kitchen Splashback
A simple step-by-step guide for a secure, professional finish.
Installing a kitchen splashback is straightforward when you have the right tools and preparation. Follow our guide to prepare the wall, apply adhesive, position your splashback and achieve a clean, secure finish.
DIY friendly
Clear, practical guidance
Step-by-step
Simple installation process
Secure finish
Built for lasting results
Straightforward installation
Clear instructions from preparation to final fitting
DIY friendly
Clear, practical guidance
Quick installation
Simple step-by-step process
Secure & long-lasting
A durable professional finish
Easy to follow
Clear instructions with images
Get prepared
Before You Begin
A little preparation goes a long way. Make sure you have the right tools, a clean and dry wall surface, and your kitchen splashback ready before you begin the installation.
Everything you need
Tools You’ll Need
Most kitchen splashback installations can be completed with a few common household tools and the correct splashback adhesive.
Measuring tape
For checking positioning and dimensions.
Spirit level
To make sure your splashback is straight.
Caulking gun
For applying splashback adhesive cleanly.
Clean cloth
For cleaning and preparing the wall surface.
Protective gloves
To keep your hands clean while fitting.
Step by step
Step-by-Step Kitchen Splashback Installation Guide
Follow these simple steps to prepare your wall, apply the correct adhesive and fit your kitchen splashback securely.
1
Prepare the wall surface
Make sure the installation area is clean, dry and free from dust, grease, loose paint or other residue.
A smooth, solid surface gives the splashback adhesive the best possible bond.
Allow the wall to dry completely before applying adhesive.
2
Apply the splashback adhesive
Using a caulking gun, apply a suitable splashback adhesive to the reverse of the glass.
Follow the adhesive manufacturer's instructions for the recommended application pattern and quantity.
Use an adhesive specifically suitable for glass splashbacks.
3
Position the splashback
Carefully lift the splashback into position and press it gently but firmly against the prepared wall.
Use a spirit level to check the splashback is straight before the adhesive begins to set.
Do not slide the glass around excessively once it has made contact with the adhesive.
4
Secure and allow to cure
Once the splashback is correctly positioned, leave the adhesive to cure according to the manufacturer's instructions.
Remove any excess adhesive carefully and avoid putting unnecessary pressure on the panel while it cures.
Check the adhesive instructions before using the area normally.
Recommended product
Recommended Splashback Adhesive
Colorspray Splashback Adhesive & Sealant Clear 310ml
Designed for glass splashbacks
Strong & secure bond
Solvent-free formula
Easy application
£14.99
Tax included.
Shop now
Top tips
For the Best Results
A few simple checks before and during installation can help you achieve a cleaner, longer-lasting finish.
Check the room conditions
Make sure the wall and installation area are clean, dry and suitable before applying adhesive.
Allow the adhesive to cure
Follow the adhesive manufacturer's curing guidance before putting pressure on the splashback.
Use the right adhesive
Use an adhesive specifically suitable for glass splashbacks for a secure bond.
Handle the glass carefully
Wear suitable gloves and avoid knocking the edges or corners during installation.
Frequently asked questions
Kitchen Splashback Installation FAQs
Answers to some of the most common questions about fitting and installing a kitchen splashback.
Many splashbacks can be installed as a DIY project if you are confident with basic fitting work. The wall should be properly prepared, the measurements checked, and the correct adhesive used. If you are unsure, consider asking an experienced installer for help.
Use an adhesive that is specifically suitable for glass splashbacks and follow the manufacturer's application instructions. We recommend our Colorspray Splashback Adhesive & Sealant Clear 310ml for fitting compatible glass splashbacks.
The physical fitting process can be relatively quick once the wall is prepared, but the adhesive will need time to cure. Always follow the curing time stated by the adhesive manufacturer before using the area normally.
A suitable toughened glass kitchen splashback can be used behind many hobs, but you should always follow the hob manufacturer's clearance requirements and any relevant installation guidance.
Allow the adhesive to cure fully before exposing the newly installed splashback to normal cooking conditions. Refer to the adhesive manufacturer's instructions for the appropriate curing time.
Need a hand?
Still Need Help?
If you’re unsure about fitting your kitchen splashback or need advice before installation, our team is here to help.
Contact us
Friendly advice from the Choose Your Print team
